coating thickness gauge to be connected to separate, exchangeable probe

Magnetic induction method (F version)
Eddy current method (N version)

± (1 µm/0.04 mils + 1 % of reading)
for FN 1.5, F 1.5, N 1.5, FN1.5/90°

± (2 µm/0.08 mils + 1 % of reading)
for FN 3.5, F 3.5

± (3 µm/0.12 mils + 1% of reading) for F 10

± (0.7 µm/0.03 mils + 1% of reading) for FN 0.2

(referred to PHYNIX standards)

0.1 µm/0.004 mils or < 0.2 % of reading
for FN 1.5, F 1.5, N 1.5, FN1.5/90°, FN 0.2

1 µm/0.04 mils or < 0.2 % of reading
for FN 3.5, F 3.5, F 10

4-digit display
digit height 10 mm / 400 mils
32 alphanumerical characters
switchable backlight
selectable between µm/mils

acoustically and optically

FN 1.5, F 1.5, N 1.5, FN1.5/90°, FN 0.2:
5 mm x 5 mm/200 mils x 200 mils

FN 3.5, F 3.5:
10 mm x 10 mm/400 mils x 400 mils

F 10:
20 mm x 20 mm/800 mils x 800 mils

FN 1.5, F 1.5, N 1.5, FN 0.2:
convex 1.5 mm/60 mils, concave 5 mm/200 mils

FN 3.5, F 3.5:
convex 5 mm/200 mils, concave 50 mm/2 inch

F 10:
convex 5 mm/200 mils, concave 16 mm/640 mils

FN1.5/90°: 12 mm/500 mils

FN 1.5, F 1.5, N 1.5, FN1.5/90°, FN 0.2:
iron/steel: 0.2 mm/8 mils
non-ferrous metals: 50 µm/2 mils

FN 3.5, F 3.5:
iron/steel: 0.5 mm/20 mils
non-ferrous metals: 0.1 mm/4 mils

F 10:
iron/steel: 1 mm/40 mils

·Factory calibration: no calibration required for standard applications
· Zeroing (1-point calibration): measurements on small geometries
· Zeroing and foil calibration (2-point calibration): increased measuring accuracy
· Two-foil calibration: especially for rough, sand-blasted surfaces
· Cal-Through-Coat-Calibration: calibration without uncoated test object
· Zero offset: addition/subtraction of a constant value to/from the reading

Freely selectable; optical and acoustic signal if limit value is exceeded

For continuous measurements;
for the quick recognition of coating thickness variations;
with permanent display of minimum and maximum reading

Single-value statistics:
number of readings, mean value, standard deviation, maximum and minimum reading, kvar, cp, cpk from max. 10000 readings

Block-value statistics:
number of readings, mean value, standard deviation, maximum and minimum reading, kvar, cp, cpk; block size 3 to 100 readings

calculate the data histogram according to the gauge limit setting and print it on portable printer Printfix

10000 readings in max. 250 freely selectable files; alphanumerical file names;
saved readings and statistical values individually recallable

Infrared interface
serial RS232 interface

Operator prompting and documentation in German, English, French (other languages optional)

-15 °C to 60 °C / 5 °F to 140 °F
optional up to 150 °C / 302 °F

0 °C to 50 °C / 32 °F to 122 °F

-20 °C to +60 °C / -4 °F to 140 °F

2 x Mignon cells (AA) 1.5V
up to 60 hours of operating time

Protection class IP52 (protection against dust and dripping water)

Gauge:
137 mm x 66 mm x 23 mm/5.4" x 2.6" x 0.9" (HxWxD)

probes FN 1.5, F 1.5, N 1.5, FN 0.2:
dia. 14 mm x 83 mm / dia. 0.56" x 3.3"

probes FN 3.5, F 3.5:
dia. 25 mm x 47 mm/ dia. 1" x 1.8"

probe F 10:
dia. 25 mm x 48 mm/ dia. 1" x 1.9"

probe FN1.5/90°:
8 mm x 10 mm x 180 mm/ 0.3" x 0.4" x 7.0" (HxWxD)

Gauge: approx. 155 g / 5.5 ozs incl. batteries
probes FN 1.5, F 1.5, N 1.5, FN 0.2: approx. 70 g / 2.5 ozs
probes FN 3.5, F 3.5: approx. 105 g / 3.7 ozs
probe F 10: approx. 85 g / 3.0 ozs
probe FN1.5/90°: approx. 80 g / 2.8 ozs

DIN EN ISO, ASTM, BS