• exchangeable probes

• high accuracy

• measurements on iron/steel and/or on non-ferrous metals and austenitic stainless steels (depending on the probe)

• data memory for 10000 readings in up to 250 files

• five different calibration methods

• scan mode for continuous measurements

• freely selectable limit values with alarm signal

• infrared and serial RS232 interface
  
  

:: further

• FN 1.5 for measurements on all metals

• F 1.5 for measurements on iron/steel

• N 1.5 for measurements on non-ferrous metals

• range 0 - 1500 µm/0 - 60 mils

• tolerance ± (1 µm/0.04 mils + 1 % of reading)

:: further

• FN 3.5 for measurements on all metals
  range 0 - 3500 µm/0 - 140 mils on iron/steel
  0 - 3000 µm/0 - 120 mils on non-ferrous metals

• F 3.5 for measurements on iron/steel
  range 0 - 3500 µm/0 - 140 mils
  tolerance ± (2 µm/0.08 mils + 1 % of reading)

:: further

• F 10 for measurements on iron/steel

• range 0 - 10 mm/0 - 400 mils

• tolerance ± (3 µm/0.12 mils + 1 % of reading)

:: further

• FN1.5/90° angled probe for measurements in tubes or grooves;
  for measurements on all metals

• range 0 - 1500 µm/0 - 60 mils

• tolerance ± (1 µm/0.04 mils + 1 % of reading)

:: futher

• FN 0.2 for measurements on all metals

• special probe for very thin coatings:
  range 0 - 200 µm/0 - 8 mils

• highest precision:
  tolerance ± (0.7 µm/0.04 mils + 1 % of reading)

:: further