Types: | FN 1.5 for measurements on all metals
range 0 - 1500 µm/0 - 60 mils
F 1.5 for measurements on iron/steel
range 0 - 1500 µm/0 - 60 mils
N 1.5 for measurements on non-ferrous metals
range 0 - 1500 µm/0 - 60 mils
FN 1.5 R angled probe for measurements on all metals
range 0 - 1500 µm/0 - 60 mils
F 1.5 R angled probe for measurements on iron/steel
range 0 - 1500 µm/0 - 60 mils
FN 3.5 for measurements on all metals
range 0 - 3500 µm/0 - 140 mils on iron/steel
0 - 3000 µm/0 - 120 mils on non-ferrous metals
F 3.5 for measurements on iron/steel
range 0 - 3500 µm/0 - 140 mils
F 10 for measurements on iron/steel
range 0 - 10 mm/0 - 400 mils
FN1.5/90° angled probe for measurements within tubes or grooves; for measurements on all metals
range 0 - 1500 µm/0 - 60 mils
FN 0.2 special probe for very thin coatings;
for measurements on all metals
range 0 - 200 µm/0 - 8 mils
|
Tolerance: | ± (1.0 µm/0.04 mils + 1 % of reading)
for FN 1.5, F 1.5, N 1.5,
FN 1.5 R, F 1.5 R, FN1.5/90°
± (2.0 µm/0.08 mils + 1 % of reading)
for FN 3.5, F 3.5
± (3.0 µm/0.12 mils + 1% of reading) for F 10
± (0.7 µm/0.03 mils + 1% of reading) for FN 0.2
(referred to PHYNIX standards) |
Minimum area of measurement: | FN 1.5, F 1.5, N 1.5, FN 1.5 R,
F 1.5 R, FN1.5/90°, FN 0.2:
5 mm x 5 mm/200 mils x 200 mils
FN 3.5, F 3.5:
10 mm x 10 mm/400 mils x 400 mils
F 10:
20 mm x 20 mm/800 mils x 800 mils |
Minimum radius of curvature: | FN 1.5, F 1.5, N 1.5, FN 0.2:
convex 1.5 mm/60 mils, concave 5 mm/200 mils
FN 1.5 R, F 1.5 R:
convex 5 mm/200 mils, concave 20 mm/800 mils
FN 3.5, F 3.5:
convex 5 mm/200 mils, concave 50 mm/2 inch
F 10:
convex 5 mm/200 mils, concave 16 mm/640 mils |
Minimum ID tube measurement: | FN1.5/90°: 12 mm/500 mils |
Minimum thickness of substrate: | FN 1.5, F 1.5, N 1.5, FN 1.5 R,
F 1.5 R, FN1.5/90°, FN 0.2:
iron/steel: 0,2 mm/8 mils
non-ferrous metals: 50 µm/2 mils
FN 3.5, F 3.5:
iron/steel: 0,5 mm/20 mils
non-ferrous metals: 0,1 mm/4 mils
F 10:
iron/steel: 1 mm/40 mils |
Surface temperature: | -15 °C to 60 °C / 5 °F to 140 °F
optional up to 150 °C / 302 °F |
Dimensions: | FN 1.5, F 1.5, N 1.5, FN 0.2:
dia. 14 mm x 83 mm / dia. 0.56" x 3.3"
FN 1.5 R, F 1.5 R:
dia. 16 mm x 24 mm x 62mm / dia. 0.63" x 0.95" x 2.44"
FN 3.5, F 3.5:
dia. 25 mm x 47 mm/ dia. 1" x 1.8"
F 10:
dia. 25 mm x 48 mm/ dia. 1" x 1.9"
FN1.5/90°:
8 mm x 10 mm x 180 mm/ 0.3" x 0.4" x 7.0" (HxWxD) |
Weight: | FN 1.5, F 1.5, N 1.5, FN 0.2:
appr. 70 g/ 2.5 ozs
FN 1.5 R, F 1.5 R:
appr. 90 g/ 3.2 ozs
FN 3.5, F 3.5:
approx. 105 g/ 3.7 ozs
F 10:
approx. 85 g/ 3.0 ozs
FN1.5/90°:
approx. 80 g/ 2.8 ozs |
